BenQ XL2731K User Manual page 14

Turn the base counterclockwise until you cannot
go further.
Raise the thumbscrew lid (
thumbscrew as illustrated (
back.
Carefully put down the stand and the base.
Gently attempt to pull the stand and the base back
apart to check that they have properly engaged.
Carefully lift the monitor, turn it over and place it
upright on its stand on a flat even surface.
To move the monitor, you must hold the handle and the
bottom of the stand base at the same time as illustrated. You
can protect the monitor using the supplied protective cover.
14 How to assemble your monitor hardware
) and tighten the
). Then push the lid
2
1
Lock