Source Menu - Zenith Presentation H25E46DT Installation And Operating Manual, Warranty

Source Menu

Choose the source of
the picture and sound
Source Selection
A
Press TV/VCR SOURCE on the remote repeatedly to cycle
through the available sources.
Note: See page 24 for source connection priorities.
Source Selection using Source Menu
1
Press MENU on the remote repeatedly until the Source
menu appears.
2
Use the Up/Down arrow on the remote control, to select
a new source for the picture and sound that you want to
to appear on your screen.
3
Press ENTER on the remote, to change to the new
source, press ENTER again to remove menu and return
to TV viewing.
Menu Operation/Front Control Panel
The menus can also be operated by using the TV front
control panel buttons. See page 22 for menu operation
instructions.
If you need to key-in numbers, use the remote control.
If the source you want to select does not appear as an option
on the Source menu, it may be set up as a Auto Sense input.
Sources that are specified as Auto Sense inputs will not appear
on the Source menu.
P A G E 3 8
SOURCE MENU
ANTENNA/CABLE
CAMPORT
AUX VIDEO
S-VIDEO
FRONT COMPUTER SVGA
REAR COMPUTER SVGA
PRESS TO CHANGE
< >
PRESS OR KEYS TO ACTIVATE
ENTER
Selecting Viewing Sources Using
Onscreen Menus
SOURCE
ANTENNA/CABLE
PRESS:
SOURCE TO CHANGE
ENTER TO ACTIVATE
Selecting Viewing Sources Pressing
TV/VCR Source Key on Remote
PRG
VCR
CABLE AUX
SURF FLASHBK
CHANNEL
VOLUME
CHANNEL
1 2
4 5
7 8
0
ENTER
2
MENU
1
RECORD PAUSE TIMER
PLAY
REWIND
STOP
POWER
TV
MUTE
VOLUME
3
6
9
3
QUIT
2
TV/VCR
A
SOURCE
FFWD
206-4543