Source Menu; Source Se; Source Identification - Zenith SM3583BT Operating Manual & Warranty

SOURCE MENU
i
5FIUREE
[ANT/CABLE 1
ANT/CABLE 2
VIDEO 1
VIDEO 2
S-VIDEO 1
VIDEO 3 _-
S-VIDEO 2 _-
Some models ordy
Source Menu
:SOURCE SELECTION
Purpose
The viewing "source" refers to the equipment that supplies
the picture and sound to your TV. You select the viewing
:source by using the SOURCE MENU.
To Access the SOURCE MENU
1. Press SOURCE on the remote control to view the Menu
icons with SOURCE already selected and its menu show-
ing.
2. Press SOURCE repeatedly until the source you want is
highlighted.
3. Press ENTER to return to normal viewing.
CH 2
10:56
J
Channel/Time Display
For Antenna or Cable
Source
I 1
VIDEO l
10:56
Channel/Time Display
For Video or S-Video
Source
:SOURCE IDENTIFICATION
YELLOW WHITE
LE_rT /
RIGHT
]
AUDIO INPUT VIDEO INPUT J
Auxiliary A/V Jacks
Selecting VIDEO 3 : Routes the auxiliary video source (such
as a camcorder or VCR) to the TV for viewing. The video
source must be connected to the corresponding VIDEO 3
_iacks.
Selecting S-VIDEO 2: Routes the auxiliary Super-VHS VCR
source to the TV for viewing. The Super-VHS VCR must be
connected to the corresponding S-VIDEO 2 jacks.
MAGENTA
[__
BLUE RED
Connection Center on Back of TV
Selecting ANT/CABLE 1 or 2 : Routes the ANTENNA or
cable-TV source to the TV for viewing. You see program ma-
terial from whichever signal source is connected to the
ANT/CABLE 1 or 2 jack.
Selecting VIDEO 1 or 2 : Routes the video source (such as a
VCR or a Video Disc player) to the TV for viewing. The
video source must be connected to the corresponding VIDEO
1/2 jacks.
Selecting S-VIDEO 1 : Routes the auxiliary Super-VHS
VCR Source
to
the TV for viewing. The Super-VHS VCR
must be connected to the con'esponding input jacks.
:m6-o
7 -- 1