Aux 1, Aux 2, Aux 3 Programming - Zenith Presentation H25E46DT Installation And Operating Manual, Warranty

AUX+1, AUX+2, AUX+3
There are 3 additional Aux modes you can program
1
Refer to the brand programming codes on pages 50/51
to find the type and brand name of the device you're
programming.
2
Press and hold the PRG key until the indicator light
turns on.
3
Press the AUX key and the 1 on the NUMBER keypad at
the same time (for AUX +1).
4
Using the NUMBER keypad, enter the three-number code
for the device you've selected.
5
Press ENTER to save the code.
6
Turn the device on. Point the remote at the device and
press POWER. It should turn off.
7
Repeat the steps to program AUX+2, and AUX+3.
Programming your Zenith remote will allow you to use one
remote to work up to 7 different devices, if all remote operat-
ing modes are programmed!
Not all devices will work with your Zenith remote control.
P A G E 4 8
2
PRG
3
CABLE VCR
SURF FLASHBK
CHANNEL
VOLUME
CHANNEL
1 2
4 5
7 8
0
ENTER
MENU
RECORD PAUSE TIMER
PLAY
REWIND
STOP
6
POWER
AUX TV
MUTE
VOLUME
3
6
4
9
5
QUIT
TV/VCR
SOURCE
FFWD
206-3602