Advertisement
11. PAL 4-Button Transmitter Programming
Each PAL Spider Controller includes a PAL 4-button
Transmitter. This transmitter can be programmed by:
1. Choose the Spider unit from the "Devices" section
2. Click on "Settings"
3. Click on the "Remote Control"
You will then see the menu below:
Buttons are designated
1-4 starting at the top and
going clockwise around
the remote.
You can program all 4
buttons to the relay of a
single PAL Spider; or if
you have multiple Spider
units, each button can be
programmed to a differ-
ent Spider Unit.
6
Advertisement
