Advertisement
7. Electric Strike Connection
Optional
Magnetic
A
Sensor
Installation allows you
to receive a gate status
notification
A
Door or Gate Position switch - Mount this
on the door frame or on the gate in the
desired location with the wire running to the
input on the PAL controller, like shown above.
When using two door or gate position sensors
for double doors wire them in series with one
leg of each switch running back to the
controller for connection.
From the Home screen go to devices. Select
A
the device you wish to add users to. Once in
the device main menu select users. (for sites
with multiple PAL units installed please call
technical support 866-975-0101 or refer to
complete manual)
Once in users click "add" in the top right hand
B
corner. (You can also import complete
databases, please call technical support or
see full instruction manual for detailed
instructions on this)
Once you have clicked "add" you will enter
C
the main user screen. Fill out the necessary
information and click save. Note: If you enter
a phone number the user can download the
"Palgate" phone application and will be able
to trigger the gate or door from their phone.
Leaving the phone number section blank will
not allow the user to have app control of the
PAL unit.
2.4 Ghz
433 Mhz
Electric Strike
Maximum load
2A/30VDC; 0.5A/125VAC
8. Adding Users
4G
SIM
Input voltage
12VDC / 3A
4
Advertisement
