Table of Contents
Related Manuals for Siemens WG44G2AEDN
Summary of Contents for Siemens WG44G2AEDN
- Page 1 Washing machine WG44G2AEDN User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety .......... 4 7 Display ........ 20 1.1 General information.... 4 8 Buttons ........ 23 1.2 Intended use....... 4 1.3 Restriction on user group... 4 9 Programmes ....... 25 1.4 Safe installation ...... 5 10 Accessories...... - Page 3 15 Intelligent dosing system .. 33 15.1 Starting the programme with intelligent dosing sys- tem ......... 33 15.2 Filling the dispensers ..... 33 15.3 Basic dosage ...... 34 16 Basic settings...... 35 16.1 Overview of the basic set- tings........ 35 16.2 Changing the basic set- tings........ 36 17 Cleaning and servicing ....
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. - Page 6 en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶...
-
Page 7: Safe Use
Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. ▶ Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. - Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
-
Page 9: Safe Cleaning And Maintenance
Safety en 1.6 Safe cleaning and maintenance Take note of the safety instructions when cleaning and performing maintenance work on the appliance. WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. -
Page 10: Preventing Material Damage
en Preventing material damage Make sure that the length of the ▶ 2 Preventing material thread on the connection to the water tap is at least 10 mm. damage If the water pressure is too high or too low, the appliance may not be Follow these instructions to avoid ma- able to operate properly. -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en Remove all detergent residue, Set the maximum spin speed if you ▶ spray residue or other residues im- want to dry the laundry in the tumble mediately if they come into contact dryer afterwards. with the appliance. a The drier the laundry, the shorter the programme duration when dry- ing which, in turn, reduces energy... -
Page 12: Installation And Connection
en Installation and connection Replace the accessories in ques- ▶ 4 Installation and con- tion before operating the appli- ance. nection → "Accessories", Page 29 Note: The appliance has been tested 4.1 Unpacking the appliance at the factory to check it is in working order. As a result, water stains may ATTENTION! remain in the appliance. - Page 13 Installation and connection en ATTENTION! Installation loca- Requirements If residual water in the appliance tion freezes, this may cause damage to Against a wall Do not trap the the appliance. hoses between Do not install or operate this appli- ▶ the wall and the ance anywhere that is liable to ex- appliance.
-
Page 14: Connecting The Appliance
en Installation and connection Remove the power cable from the Press down on the 4 cover caps. holder. 4.5 Connecting the appliance Remove the 4 sleeves. Connecting the water inlet hose Connect the water inlet hose. Put on the 4 cover caps. Connect the water inlet hose to a tap (26.4 mm = 3/4"). -
Page 15: Aligning The Appliance
Installation and connection en When connecting to a 21 mm = ½" Sink Fix and secure tap, first fit the adapter with a seal- the water outlet ing washer. hose with an el- → Page 29. Plastic pipe with Fix and secure rubber sleeve or the water outlet gully hose with an el-... -
Page 16: Connecting The Appliance To The Electricity Supply
en Installation and connection To align the appliance, turn the ap- The connection details of the appli- pliance feet. Check that the appli- ance can be found under Tech- ance is level using a spirit level. nical data → Page 55. Check the mains plug is inserted properly. -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Maintenance flap for the drain pump → Page 38 Door Detergent drawer → Page 18... -
Page 18: Detergent Drawer
en Familiarising yourself with your appliance 5.2 Detergent drawer Manual dosing compartment : Dispenser for fabric softener : Dispenser for detergent 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 25 Programme selector → Page 30... -
Page 19: Before Using For The First Time
first time en Add washing powder to the first time 6 Before using for the manual dosing compartment. first time Prepare the appliance for use. first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory. To remove any residual water, run the first wash cycle without any laundry. -
Page 20: Display
en Display 7 Display The display shows the current settings, options or relevant information. Example: Display display Designation More information 0:40 Programme dura- Approximate expected programme dura- tion/programme tion or programme time remaining. time remaining "10" / "Ready in" time → "Buttons", Page 23 9,0 kg Recommended The maximum load capacity for the selec- load... - Page 21 Display en display Designation More information Rinse Programme status Spin Programme status End of pro- Programme status gramme Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated. → "Deactivating the childproof lock", Page 32 Crease-reduction...
- Page 22 en Display display Designation More information 50 ml Basic dosage Basic dosage for detergent or fabric softener. → "Basic dosage", Page 34 Door ¡ Lights up: The door is locked and can- not be opened. ¡ Flashes: The door is not closed prop- erly.
-
Page 23: Buttons
Buttons en 8 Buttons The selection of programme settings depends on the programme that is set. Button Selection More information (Start/Reload) ¡ Start Start, cancel or pause the pro- gramme. ¡ Cancel ¡ Pause ¡ Activate Activate or deactivate a shorter pro- (varioSpeed) gramme duration. - Page 24 en Buttons Button Selection More information (Prewash) ¡ Activate Activate or deactivate prewash, e.g. for washing heavily soiled laundry. ¡ Deactivate Note: If the intelligent dosing system is activated, the detergent will be dis- pensed automatically for the prewash and the main wash. If the intelligent dosing system is de- activated, place the detergent for the prewash directly in the drum.
-
Page 25: Programmes
Programmes en 9 Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. load (kg) Cotton Wash hard-wearing items made from cotton, linen or blended fabrics. Also suitable as a short programme for normally soiled laundry when you activate Programme setting: ¡... - Page 26 en Programmes Programme Description Max. load (kg) ¡ Max. 1400 rpm Delicate/Silk Wash delicate, washable items made from silk, vis- cose and synthetic fabrics. Use a detergent that is suitable for delicates or silk. Note: Wash especially delicate items or items with hooks, eyelets or clips in a mesh laundry bag. Programme setting: ¡...
- Page 27 Programmes en Programme Description Max. load (kg) Use a waterproofing agent that is suitable for ma- chine-washing. Do not use fabric softener. Place the detergent for outdoor fabrics in the manual dosing compartment. If the programme stops before the last rinse cycle, add the water- proofing agent to the manual dosing compartment.
-
Page 28: Laundry
en Programmes Programme Description Max. load (kg) Do not use fabric softener. Do not use liquid detergent or detergent that is in- tended for woollens or delicates. Note: The drum cleaning indicator will flash to re- mind you if you have not used a programme at 60 °C or higher for a long time. -
Page 29: Preparing The Laundry
– Brush sand out of all collars and scanning the QR code in the table of pockets contents or on siemens-home.bsh- – Close bed covers and cushion group.com . covers – Close all zips, Velcro fasteners, 11.1 Preparing the laundry... -
Page 30: Detergents And Care
Turn the programme selector to a scanning the QR code in the table ▶ programme. of contents or on siemens- a An audible function test is carried home.bsh-group.com . out. ¡ Observe the information on safety → Page 4 and preventing material... -
Page 31: Loading Laundry
operation en ¡ The setting is saved if you activate 13.6 Starting the programme or deactivate the intelligent dosing Requirement: A programme has system. been set. → "Setting a programme", Page 30 13.4 Loading laundry Press ▶ Note: To prevent creasing, note the a The drum rotates and load detec- maximum load for the programmes. -
Page 32: Cancelling The Programme
en Childproof lock Add or remove laundry. Wipe the rubber gasket dry and re- move any foreign objects. Close the appliance door. Press 13.9 Cancelling the pro- gramme Press Open the appliance door. The appliance door remains locked for safety reasons if the temperature and water levels are high. -
Page 33: Intelligent Dosing System
Intelligent dosing system en Requirements 15 Intelligent dosing sys- ¡ The laundry is prepared. → "Preparing the laundry", Page 29 ¡ The laundry is sorted. The optimum quantities of liquid de- ¡ The laundry is placed in the appli- tergent and fabric softener are dis- ance. -
Page 34: Basic Dosage
en Intelligent dosing system Pull out the detergent drawer. 15.3 Basic dosage Open the dispenser cover. The basic dosage depends on the manufacturer's instructions for the de- tergent, the water hardness and the degree of soiling of the laundry. Always set a basic dosage that cor- responds to the dosage for a stand- ard load of 4.5 kg. -
Page 35: Basic Settings
Basic settings en 16 Basic settings You can configure the basic settings for your appliance to meet your needs. 16.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme. -
Page 36: Changing The Basic Set- Tings
Note: You can find further information gent and fabric softener residue. in the digital instruction manual by Switch off the appliance. scanning the QR code in the table of → "Switching off the appliance", contents or on siemens-home.bsh- Page 32 group.com . Pull out the detergent drawer. - Page 37 Cleaning and servicing en Press down on the insert and re- Empty the detergent drawer. move the detergent drawer. Clean the pump unit with a damp Remove the pump unit. cloth. Unclip the detergent drawer cover Clean the detergent drawer and and remove it.
-
Page 38: Cleaning The Drain Pump
en Cleaning and servicing Disconnect the appliance's mains plug from the power supply. Open and remove the service flap. Slide a sufficiently large container under the opening. Clean the housing of the detergent drawer in the appliance. Take the drain hose out of the holder. - Page 39 Cleaning and servicing en Cleaning the drain pump CAUTION - Risk of scalding! When you wash at high temperat- Requirement: The drain pump is ures, the detergent solution gets empty. → Page 38 hot. Since water may remain in the Do not touch the hot detergent ▶...
- Page 40 en Cleaning and servicing Insert the pump cap. Before the next wash Ensure that the parts of the To prevent unused detergent from ‒ pump cap are correctly as- flowing straight into the outlet in the sembled. next wash, run the Drain programme after you have emptied the drain pump.
-
Page 41: Troubleshooting
Troubleshooting en 18 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 42 en Troubleshooting Fault Cause and troubleshooting "E:36 / -10" Unapproved extension installed on the water drain hose. Remove any unapproved extensions from the water ▶ hose. → "Connecting the appliance", Page 14 The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way ▶...
- Page 43 Troubleshooting en Fault Cause and troubleshooting "E:30 / -10" and/or First wait approx. 5 minutes until the drain process ends. To reset the error message, switch the appliance off. Switch the appliance back on. If the error message is displayed again, call cus- tomer service.
- Page 44 en Troubleshooting Fault Cause and troubleshooting "E:30/-20" Do not add any extra water to the appliance while it ▶ is operating. The appliance is not The mains plug of the power cord is not plugged in. working. Connect the appliance to the power supply. ▶...
- Page 45 Troubleshooting en Fault Cause and troubleshooting The programme does Push in the detergent drawer until the symbol goes ▶ not start. out. The door cannot The temperature is too high. be opened. Wait until the temperature has dropped. ▶ → "Cancelling the programme", Page 32 ▶...
- Page 46 en Troubleshooting Fault Cause and troubleshooting The water is not drain- Ensure that the pump cap is screwed in all the way ▶ ing. into the appliance. The handle on the pump cap must be in a vertical position. Water is not flowing You have not pressed ...
- Page 47 Troubleshooting en Fault Cause and troubleshooting Vibrations and move- Appliance is not correctly aligned. ment of the appliance → "Aligning the appliance", Page 15 ▶ whilst spinning. The appliance feet are not fixed. Secure the appliance feet. ▶ → "Aligning the appliance", Page 15 Transit bolts have not been removed. → "Removing the transit bolts", Page 13.
- Page 48 en Troubleshooting Fault Cause and troubleshooting The spin programme Drain pipe or water outlet hose is blocked. does not start. Clean the drain pipe and the water outlet hose. ▶ Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are ▶...
- Page 49 Troubleshooting en Fault Cause and troubleshooting Creasing. The next time you run a wash cycle, reduce the ▶ amount of laundry being loaded. Unsuitable programme for the type of fabric. Select the programmes that are suitable for the ▶ type of fabric. The spin result is not A low spin speed is selected.
- Page 50 en Troubleshooting Fault Cause and troubleshooting Detergent residue on Drain the dispenser. the damp washing. → "Cleaning the detergent drawer", Page 36 Clean the dispenser. Refill the dispenser. → "Filling the dispensers", Page 33 Basic dosage is not correctly adjusted. If intelligent dosing is activated, reduce the basic ▶...
- Page 51 Troubleshooting en Fault Cause and troubleshooting Insufficient cleaning. Clean the dispenser. Refill the dispenser. → "Filling the dispensers", Page 33 Water is leaking out at Water inlet hose is not correctly/securely connected. the water inlet hose. Connect the water supply hose correctly. → "Connecting the water inlet hose", Page 14 Tighten the screw connection.
-
Page 52: Emergency Release
Note: You can find further information Page 12 and in the digital instruction manual by → "Starting an empty washing scanning the QR code in the table of cycle", Page 19. contents or on siemens-home.bsh- group.com . Turn off the tap. Empty the water inlet hose. -
Page 53: Disposing Of Old Appliance
Customer Service en 19.4 Disposing of old appli- 20 Customer Service ance If you have any queries on use, are Valuable raw materials can be re- unable to rectify faults on the appli- used by recycling. ance yourself or if your appliance needs to be repaired, contact Cus- WARNING tomer Service. - Page 54 en Customer Service Make a note of your appliance's de- tails and the Customer Service tele- phone number to find them again quickly.
-
Page 55: Consumption Values
Consumption values en 21 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456. The automatic dosing function has been deactivated for this pur- pose. - Page 56 en Technical data Mains voltage 220-240 V, 50-60 Hz Minimum in- stallation protec- tion Nominal power 2300 W Power consump- ¡ Off mode: tion 0,15 W ¡ Left-on mode: 0,50 W Water pressure ¡ Minimum: 100 kPa (1 bar) ¡ Maximum: 1000 kPa (10 bar) Length of the wa- 150 cm ter inlet hose Length of the wa-...
- Page 60 Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001652760* 9001652760 (020328)