Installer Menus - Zenith Concierge H20D35DT Installation And Operating Manual, Warranty

Installer Menus

Use the Installer's Menus to make TV operation adjustments
Accessing the Installer's Menu
Installer's menus can be accessed by using the installer's remote control.
Just press and hold MENU (about 8 seconds) until the display changes,
then press 9, 8, 7, 6, then ENTER. To exit the Installer's Menu, press
ENTER again. Any changes you make will be stored in nonvolatile memory.
The Installer's Menu opens with item 03, POWER MANAGE. Press the
SELECT key to sequence through the various items. Or, access an item
directly by entering the line number, then pressing MENU. For example, to
access the Start Channel option which is on line 11, press 11, then MENU.
To change a current setting use the Left/Right ADJ keys.
Using the Installer's Menu
Items 00-24 are immediately accessible only upon entering the Installer's
Menu. Their numbers, descriptions, ranges, factory default settings, and a
place for listing any changes made on-site are given below. A second sec-
tion of the Installer's Menu that is intended for qualified service techni-
cians only is not shown (items 25-79). Normally these items do not
require adjustment.
Items in the Installer's Menu:
Item Description
00 FACT MENU
01 PRESET PX
02 PRESET AX
03 POWER MANAGE
04 VERT POS
05 HORZ POS
06 BAND/AFC
07 MIN VOLUME
08 MAX VOLUME
09 AC ON
10 KEY DEFEAT
11 STRT CHANNEL
12 STRT VOLUME
13 HOSPITAL MODE
14 CHAN LOCK
15 GHOST CH.
16 SCAN MODE
17 TEXT MODE
18 SLEEP TIMER
19 ALARM
20 CH. OVER RIDE
21 OLD OCV
22 CAPTION LOCK
23 FUNCTION PRE
24 FEATURE LEVEL
206-3687-0
03
XX/XX/OX
Range Fact. Set
0 - 1 1
0 - 1 1
0 - 1 1
0 - 7 0
0 - 30 15
0 - 45 15
0 - 7 0
0 - 63 0
0 - 63 63
0 - 1 0
0 - 1 1
0 - 255 255
0 - 63, 55 255
0 - 2 0
0 - 1 0
0 - 1 0
0 - 3 0
0 - 1 1
0 - 1 1
0 - 1 1
0 - 1 1
0 - 1 0
0 - 1 0
0 - 1 0
0 - 1 1 Zen 1/0 P Lbl
1390-04 1.45
POWER MANAGE
TE = 10110000
Installer should leave item 00 FACT MODE
set to 0 (default). Items 25-79 are ser-
vice-type adjustments and only qualified
technicians having specialized test equip-
ment should access them.
Recommend. Setting
Leave default set 0
Leave default set 0
Leave default set 0
Leave default set 1 (1 ZEN1)
01
0
P A G E 3 3