GE GL317D Instruction Manual page 4

Introduction
04- 2017
Content
Instruction Manual
Your decision to use GE high voltage switchgear means that you have
chosen a product that is very advanced technically and has proven effec-
tive and reliable in the field.
The entire development and production process for our high voltage
switchgear is controlled by an ISO 9001 certificated quality management
system, an ISO 14001 certified environmental management system, and
the OHSAS 18001 occupational health and safety management system.
Regular audits guarantee that our products and services meet high quality
standard.
In order to ensure optimum operation (and take advantage of all product
benefits), please follow the instructions in this manual when installing,
commissioning and operating the equipment. In the event of problems or
equipment malfunction, please contact your local GE representative.
This manual describes installation, commissioning, operation, inspection,
maintenance and reconditioning. Additional copies of this manual can be
obtained from your local GE representative by specifying the OI- number.
GE's high voltage switchgear units are specifically designed to allow for
long maintenance intervals. The operational reliability of the equipment is
guaranteed by proper servicing and by following the instructions given in
this manual. GE assumes no liability for damage due to failure to follow the
manual instructions.
The information contained within this document is to be considered for
information only. GE issues no guarantee as to its accuracy, integrity or
the fact that this information may be suitable for any particular product, in
so far as this information may vary as a function of technical and commer-
cial circumstances.
This document and the equipment described herein are subject to change
without notice in the interest of further development. No claims of any kind
may be derived from the specifications, figures or descriptions.
Grid Solutions SAS
21 rue Cyprian
69611 Villeurbanne Cedex
France
www.gegridsolutions.com
GE Information
D2021EN/01
4/10