GE GL317D Instruction Manual page 111

Preparing the pole operating shaft, continued
"Manual opening"
operation, continued
11- 2016
Installation
Installation of operating device
The table below gives the steps of "manual opening" operation :
Step Action
3 Put back the blocking tool
(4) on the flange of the
sleeve (12).
NOTE : This tool ensure
the angular positioning of
pole operating shaft dur-
ing the coupling with the
operating mechanism.
4 Remove the lever (6).
5 Remove the safety plate (5)
and the screws from the
flange on the front of the
handle sleeve (12).
GE Information
Diagram
M10
4
6
12
12
5
L31- 7902EN/02
4
8
5/12