S-Vhs Vcr - Zenith C13A03D Instruction Manual

Hook Up an S-VHS VCR to your TV
Your Gateway Destination II PC/TV may be connected to a Super-VHS VCR through the S-Video
Input located on the connection panel on your TV. Also, you may "daisy chain" up to four TVs to
one Super VHS VCR through the special S-Video LOOP OUT connection.
1
Hook up your S-VHS VCR to your Destination II
PC/TV according to the diagram below.
2
Remove the back of the remote and put in two
AAA batteries.
back of
remote
3
Plug in your TV. Do not plug it into a switched
outlet. Your TV is designed to operate on standard
current, 120-volt 60 Hertz AC. Do not attempt to
operate it on DC Current.
4
If you wish to "daisy chain" more than one TV to
receive the S-VHS signal, you will need to make
the following connections with an S-Video cable,
inserting one end of the cable into the LOOP OUT
port with the other end inserted into a S-Video In
port of your second TV or equivalent input for any
other brand of TV.
206-3643
4
S-Video cable
not included
with TV
Connect Audio Out
to an external
amplifier and
speakers.
TV back
C
O
M
ANTENNA
P
CABLE
U
T
E
R
I S-VIDEO OUT
S-VIDEO IN
N
VIDEO
M.P.I.
Video Out
R
AUDIO OUT
COMPUTER
L
AUDIO
VCR back
VCR back AV panel
output
switch 3 4
S-Video Out
Audio Out
R L
R- AUDIO- L
R- AUDIO- L
AUX IN
R- AUDIO- L
P A G E 1 9