Table of Contents
Advertisement
(2) ATX 12V Power Connector (4-pin block) : ATX12V
This is a new defined 4-pins connector that usually comes with ATX Power Supply. The
ATX Power Supply which fully support Pentium 4 processor must including this
connector for support extra 12V voltage to maintain system power consumption.
Without this connector might cause system unstable because the power supply can not
provide sufficient current for system.
(3)
USB Port connector: USB1
The connectors are 4-pin connector that connect USB devices to the system board.
(4)
LAN Port connector: UL1
This connector is standard RJ45 over USB connector.
(5)
PS/2 Mouse & PS/2 Keyboard Connector: KB1 (PS2 KB/MOUSE)
The connectors for PS/2 keyboard and PS/2 Mouse.
(6)
Parallel Port Connector (25-pin female): PARALLEL
Parallel Port connector is a 25-pin D-Subminiature Receptacle connector. The On-board
Parallel Port can be disabled through the BIOS SETUP. Please refer to Chapter 3
"INTEGRATED PERIPHERALS SETUP" section for more detail information.
(7)
SPDIF In/Out Connector: SPDIF_IN/OUT
The SPDIF output is capable of providing digital audio to external speakers or
compressed AC3 data to an external Dolby digital decoder. Use this feature only when
your stereo system has digital input function. Use SPDIF IN feature only when your
device has digital output function.
(8)
Audio Line-In, Lin-Out, MIC, Surrback, Surround, GEN/LEF Connector :
PHONE_JACK
This Connector are 6 phone Jack for LINE-OUT, LINE-IN, MIC, Surrback, Surround,
GEN/LEF
Line-out : (GREEN)
Line-in : (BLUE)
MIC : (PINK)
Surrback : (ORANGE)
CEN / LFE : (BLACKNESS) Audio output to speaker-Center/Subwoofer speaker out
Surround: (GRAY)
Pin 1
Audio output to speaker
Audio input to sound chip
Microphone Connector
Audio output to speaker-Rear speaker out
Audio output to speaker-Side speaker out
23
Advertisement
Table of Contents
