Table of Contents
Advertisement
possible to certain official emergency number
programmed into your device.
Voice mailbox settings
For information on calling a voice mailbox (network
service), see "Calling" on page 36.
1
Press
, and select
Tools
2
Define the voice mailbox number, and if you wish to do
so, the DTMF tone (voice mailbox password):
Number:
— Write the voice mailbox number obtained
from your service provider.
DTMF:
— Define DTMF tones for a voice mailbox. For
more information on DTMF tones, see "Sending DTMF
tones" on page 41.
If your SIM card supports the alternate line service, you
can define the voice mailbox settings for both lines.
Other settings
Press
, and select
Tools
>
Define the following:
Call page
Call waiting:
(network service)— If you have activated the
call waiting service, the network will notify you of a new
incoming call while you have a call in progress. The option
Check status
checks whether call waiting is activated or
not.
>
Settings
>
Voice
mailbox....
Settings
>
Other
settings....
Send my caller ID:
(network service) — Determines whether
your number is hidden or presented to the person you are
calling. The value may be set by your network operator or
service provider when you make a subscription
network).
Summary after call:
— If you select the option On, the
approximate duration of a call will be displayed after the
call.
Automatic redial:
— If you select the option On, and you call
a number that is busy or does not answer, the device
attempts to call the number automatically. The maximum
number of attempts is 10.
Reject with message:
— If you select the option On, a text
box opens, where you can write a message that you can
send to a caller as a reply, whenever you mute an
incoming phone call. To modify the message afterwards,
select the option
Edit
message.
Line in use:
(network service)— If your SIM card supports
the alternate line service, select the line you want to use.
Block line change:
(network service) — If your SIM card
supports the alternate line service, and you select this
option, you cannot change the line in use. If you want to
change this setting, you must enter your PIN2 code.
Network page
Operator selection:
— Allows you to change the way a
network is selected, and also to register to another
network. In automatic network selection, the device
(Set by
40
Advertisement
Table of Contents
