Remotes With No Code Search Button - Zenith ZEN100 User Manual

REMOTES WITH NO CODE SEARCH BUTTON

The ZEN300 model remote has no CODE SEARCH button.
Follow the instructions below to program it.
1. Manually turn on the device you wish to program.
2. Press and hold a mode button (TV, VCR, or CBL) until
the Indicator Light lights, then release the mode
button.
4. Find the three digit code for your Cable box in the
code list and enter it using the REW, PLAY, and F.F.
buttons.
Examples: If the code is 123, press the REW button
once for 1, press PLAY twice for 2, and then press F.F.
three times for 3. If the number is 0, then skip that
button. If the code is 013, do not press the REW
button, press PLAY once for 1, and press F.F. three
times for 3.
5. After your code is entered, the Indicator Light will
turn off. Press MUTE to save the code.
6. Write down the code for future reference.
If your code for your device is not listed, try the fol-
lowing procedure to find the code for your device:
1. Manually turn on the device you wish to program.
2. Press and hold the desired mode button until the
Indicator Light turns on, then release the mode
button.
3. Press POWER to initiate the search
4. Cycle through the codes by pressing and releasing
the CHAN + button (Up Arrow). Keep pressing CHAN +
until the device responds (this may take up to 300
tries). If skip over a code, press CHANNEL DOWN to
back up.
5. Press MUTE to complete setup.
6. Now read below to learn how to identify your code
number for future use.
ZENITH REMOTE MANUAL
ZEN REMOTE PROGRAMMING
5
To indentify the code assigned to a mode button, follow
the procedure below:
1. Press and hold a mode button (TV, VCR, or CBL) until
the Indicator Light lights, then release the mode
button.
2. Press and release the mode button again. The
indicator light should remain on.
3. Press the REW button for the first digit of the code.
The Indicator Light will flash on and off a number of
times. Count how many times the light flashes. That
number is the first digit of the code. Repeat this
process for the second and third digits using the
PLAY and F.F. buttons respectively.
4. Write down the code for future reference.
ZEN SERIES