Download Print this page
Valcom VIP-2270 Manual

Valcom VIP-2270 Manual

Ip flat panel speaker

Advertisement

Quick Links

INTRODUCTION
The VIP-2270 IP Flat Panel Speaker is
suitable for large and/or noisy areas such as
warehouses and manufacturing facilities.
The innovative flat panel design provides 360-
degree coverage in open spaces and produces
less reverberation than cone-type speakers.
The lightweight aluminum frame construction
eases installation effort.
SPECIFICATIONS
FEATURES
• Software controlled volume setting
• Removable input wiring connector
• 360° audio output
Nominal Specifications
• Frequency Response: 200Hz - 8kHz
• Dispersion: 360°
• SPL @ 1W, 1 Meter: 90 dB
Dimensions / Weight
• 19.25" W x 13.25" H x 3.0" D (4.5" D w/Wall
Bracket)
(48.9 cm x 33.7 cm x 7.6 cm (11.4 cm w/Wall
Bracket)
• 4.4 lb. (2.0 kg)
Environment
• Temperature: 0 to 40°C (32 to 104°F)
• Humidity: 0 to 85%, non-precipitating
• Indoor use only
VIP-2270 IP Flat Panel Speaker
1
Precautionary Designations
WARNING-To Reduce The Risk Of Fire Or Electric
Shock. Do Not Expose This Apparatus To Rain Or
Moisture.
AVERTISSEMENT - Afin de réduire les risques
d'incendie ou de décharge électrique, évitez
d'exposer le système à la pluie ou à l'humidité.
Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
L'appareil ne doit pas être exposé à des
égouttements et éclaboussures et aucun Objet
Rempli de liquide, comme vase, ne doit être placé
sur l'appareil.
FCC Information
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications. Operation
of this equipment in a residential area may cause harmful
interference in which case the user will be required to
correct the interference at his own expense.
Issue 1
947131

Advertisement

loading

Summary of Contents for Valcom VIP-2270

  • Page 1 Issue 1 VIP-2270 IP Flat Panel Speaker INTRODUCTION The VIP-2270 IP Flat Panel Speaker is suitable for large and/or noisy areas such as warehouses and manufacturing facilities. The innovative flat panel design provides 360- degree coverage in open spaces and produces less reverberation than cone-type speakers.
  • Page 2 INSTALLATION Mounting CAUTION The VIP-2270 speaker can be mounted to a wall or RISK OF ELECTRIC SHOCK DO NOT OPEN attached to a structural beam. For wall or other surface mounting, use the bracket shown in Figure 1. The CAUTION: To reduce the risk of electric shock, bracket is attached to the speaker for shipping;...
  • Page 3 Figure 1: Wall or Surface Mounting Figure 2: Beam Mounting 947131...