HP 16500H User Manual page 22

Using the HP 16500B X Window Interface
To start the interface
Send the XWIN ON programming command to the HP 16500B.
2
The syntax of the XWIN ON command is:
xwin on,"<X server IP address>:<display>.<screen>"
The IP (Internet Protocol) address is the address of the X Windows server.
Example Pseudo–Telnet method using a UNIX computer.
To enable windows to be initiated from the HP 16500B named lp16500b,
enter the following command on the computer running the X server (and the
UNIX operating system in this example):
xhost +lp16500b
To connect to the command parser socket of the HP 16500B named
"lp16500b", enter:
telnet lp16500b 5025
The HP 16500B is not a telnet server. The telnet UNIX command is used to make
a connection to the HP 16500B command parser, which uses socket number
5025 in the logic analyzer. A telnet server would normally not need to have the
socket specified.
Now, to start the X Window interface on the computer, whose IP address is
15.6.253.146 (and is running the X server), enter:
xwin on,"15.6.253.146:0.0"
2-6