Panasonic EW-DJ4B-G503 Operating Instructions Manual page 13

If the water tank cap
comes off
• Align the groove of the
water tank cap with the
protrusion of the water
supply port, and press the
water tank cap into place
until it clicks.
3
Press the level switch to
select your desired water
pressure level.
• After you press the level
switch, the last used water
pressure level is automatically
selected. Then each time
you press the level switch,
the water pressure level is
switched once in the following
order: 1 (weak) → 2 → 3 → 4
(strong) → 1...
Protrusion
Groove
4
LEV EL
Press
Strong
(water pressure level 4)
Weak
(water pressure level 1)
About the water pressure level memory
function
The last selected water pressure level will be
remembered, from which the appliance will
start next time.
• When the appliance has not been used for a long
time or when the battery is used up, the water
pressure level will return to 1.
Clean inside your mouth with
the water jet.
a Place the nozzle in your
mouth.
b Close your mouth gently.
c Turn on the power switch " ".
• You can switch the water
pressure level by pressing the
level switch, even while using
the appliance.
• If the main unit is tilted too
much, the water does not
come out from the nozzle.
A fully filled water tank provides approximately
40 seconds of use.
(When the water pressure level is set to 4)
Point 1
Keep your face
over the basin.
Point 2
Place the main
unit upright.
※ It can also be used in a bath.
13