How To Use - Panasonic EW-DJ4B-G503 Operating Instructions Manual

2
For safety and energy saving,
disconnect the power plug after
charging is completed.
• Disconnect the appliance plug from the charging
socket, and then close the charging socket cover.
• To keep charging the battery will not affect
battery performance.
Operating time after a full charge
approx. 10 minutes*
(When the water pressure level is set to 4)
* It varies with the ambient temperature and usage
conditions.
• Charging is completed after approx. 1 hour.
(The charging time may vary with the remaining
battery capacity.)
Notes
• The charging time may differ when the appliance is
used for the first time, or if it has not been used for
more than 6 months.
In addition, (the charge status indicator) may not
light on in the first several minutes of charging, but it
will light on as the charging proceeds.
• The recommended ambient temperature for charging
is 10 °C - 35 °C. It may take longer to charge, or
will flash rapidly and the battery may fail to charge
properly in extremely high or low temperatures.
12

How to use

1
Pull out the main body while
rotating it, and then install the
nozzle.
a Open the water tank cap.
• If it is closed, the main body
is hard to be pulled out.
b Pull the main body to the "
" mark.
• Be noted that the nozzle
may be ejected from the
nozzle storage unit.
c Install the nozzle while
holding the main body.
• Install it into place until it
clicks.
2
Fill the water tank with water.
a Add water while keeping the
main unit level.
• Do not fill beyond the
full-water position.
b Close the water tank cap
securely.
• Always use new tap water or
lukewarm water.
• If the water feels cold, use
lukewarm water with a
temperature of 40 °C or less.
click
❸
❷
❶
Full-water position