Table of Contents
Advertisement
13.8 Starting the programme
Requirement: A programme is set.
→ "Setting a programme", Page 29
Press inicio pausa + carga.
▶
The drum rotates and load detec-
a
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
The display shows the programme
a
duration or the programme end
time.
After the programme has ended,
a
the display shows: "End".
13.9 Soaking laundry
Note: No additional detergent is re-
quired for soaking. The appliance
uses the filled detergent for soaking
and washing.
Requirements
The laundry is placed in the appli-
¡
ance.
→ "Loading laundry", Page 29
A programme has started.
¡
→ "Starting the programme",
Page 31
Press inicio pausa + carga ap-
1.
prox. 10 minutes after the pro-
gramme start.
The programme pauses and the
laundry can soak.
Press inicio pausa + carga after
2.
the required soaking time.
13.10 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Press inicio pausa + carga.
1.
The appliance pauses.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
→ "Display", Page 21
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press inicio pausa + carga.
5.
13.11 Cancelling the pro-
gramme
Press inicio pausa + carga.
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
programme.
– If the water level is high, start
the
programme or select a
suitable programme for draining.
→ "Programmes", Page 24
Remove the laundry.
3.
→ "Unloading the laundry",
Page 31
13.12 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.13 Switching off the appli-
ance
Turn the programme selector to
1.
Turn off the tap.
2.
Basic operation en
.
31
Advertisement
Table of Contents
