Table of Contents
Advertisement
• Lubricate all moving parts at regular intervals.
CAUTION :Water must never come into contact with the tool.
If the supply cord of this power tool is damaged, it must be replaced by a specially prepa-
red cord available through the service organisation.
5. TROUBLESHOOTING
Although your new angle grinder is really very simple to operate, if you do experience
problems, please check the following:
1. If your grinder will not operate check the power at the main plug.
2. If your grinder wheel wobbles or vibrates, check that outer ange is tight, check that the
wheel is correctly located on the ange plate.
3. If there is any evidence that the wheel is damaged do not use as the damaged wheel
may disintegrate, remove it and replace with a new wheel. Dispose of old wheels sensibly.
4. If working on aluminum or a similar soft alloy, the wheel will soon become clogged and
will not grind effectively.
c) Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool's operation. If damaged, have
the power tool repaired before use. Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
6. SAFETY INSTRUCTIONS FOR ALL OPERATIONS
Safety Warnings Common for Grinding or Abrasive Cutting-Off Operations
Safety Warnings Common for Grinding or Abrasive Cutting-Off Operations
a) This power tool is intended to function as a grinder, sander, wire brush, polisher or
cut-off tool. Read all safety warnings, instructions, illustrations and speci cations provided
with this power tool. Failure to follow all instructions listed below may result in electric
shock, re and/or serious injury.
b) Operations such as grinding, sanding, wire brushing, polishing or cutting-off are not
recommended to be performed with this power tool. Operations for which the power tool
was not designed may create a hazard and cause personal injury.
c) Do not use accessories which are not speci cally designed and recommended by the
tool manufacturer. Just because the accessory can be attached to your power tool, it does
not assure safe operation.
d) The rated speed of the accessory must be at least equal to the maximum speed marked
on the power tool. Accessories running faster than their rated speed can break and y
apart
8
Advertisement
Table of Contents
