Table of Contents
Advertisement
location is unavoidable, use a residual current device (RCD) protected supply. Use
of an RCD reduces the risk of electric shock.
3)PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the in uence of drugs, alcohol or
medication. A moment of inattention while operating power tools may result in serious
personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appro-
priate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting
to power source and/or battery pack, picking up or carrying the tool.Carrying power tools
with your nger on the switch or energising power tools that have the switch on invites
accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better
control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce dust-re-
lated hazards.
3) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool
cannot be controlled with the switch is dangerous and must be repaired.
DISPOSAL
Do not dispose of electrical appliances with your domestic waste!The packaging
comprises exclusively.
environmentally- friendly material. Dispose of it in your local recycling
4. MAINTENANCE
• Before any work on the machine itself remove the mains plug from the mains socket.
• For safe and proper working operation, always keep the machine and ventilation slots
clean.
• Regularly check to see if any dust or foreign matter has entered the grills near the motor
and around the on/off switch. Use a soft brush to remove any accumulated dust.
• Wear safety glasses to protect your eyes whilst cleaning.If the body of the tool needs
cleaning, wipe it with a soft damp cloth. A mild detergent can be used but nothing like
alcohol, petrol or other such cleaning agents.
• Never use caustic agents to clean plastic part.
7
Advertisement
Table of Contents
