Working Hints For Your Angle Grinder - Energizer EZ900AG User Manual

out of the cut.
7. OVERLOAD
Overloading will cause damage to the motor of your angle grinder. This can happen if your
angle grinder is subjected to heavy use for prolonged periods of time.
Do not in any circumstances, attempt to exert too much pressure on your angle grinder to
speed up your work.
If your angle grinder becomes too hot, run you angle grinder under no load for 2-3 minutes
until it has cooled to normal operation temperature.

9. WORKING HINTS FOR YOUR ANGLE GRINDER

1. Your angle grinder is useful for both cutting through metals, i.e. for removing screw
heads, and also for cleaning /preparing surfaces, i.e. before and after welding operations.
2. Different types of wheel/cutter will allow the grinder to meet various needs. Typically,
grinding wheels and cutting discs are available for mild steel, stainless steel, stone and
brick. Diamond impregnated discs are available for very hard materials.
3. If the grinder is used on soft metals such as aluminum the wheel will soon clog and will
have to be changed.
4. At all times, let the grinder do the work, do not force it or apply excessive pressure to the
wheel/disc.
5. If cutting a slot ensure that the cutter is kept aligned with the slot, twisting the cutter may
cause the disc to shatter. If cutting through thin sheet, only allow the cutter to just project
through the material, excessive penetration can increase the chance of causing damage.
6. If cutting stone or brick, it is advisable to use a dust extractor.
4. SLIDE THE ON/OFF SWITCH
To start the power tool, rst press the back of on/off switch, then push the on/off switch (D)
forward.
11