Table of Contents
Advertisement
11. Once the firepit has cooled completely after use, carefully place the lid (A) onto the fire bowl and use the weather
cover (M) to protect your fire pit from the elements, (see Figure 11).
WARNING: Allow 30 minutes after use for fire pit to cool down before placing the lid to prevent scalding.
A
Make sure the control knob is in the "OFF" position. Unscrew the push button cap on the ignitor module located on the
control panel to access the battery compartment. The ignitor module requires one AAA size battery, (see Figure 12).
BATTERY IS NOT INCLUDED.
WARNING:
1. Please observe proper polarity and use the correct battery type when installing or replacing the battery. Improper
installation could result in ignition failure.
2. Please remove the battery if consumed or if product is to be left unused for a long period of time.
OFF
(APG.)
ON/MIN
(ENC./MÍN.)
BATTERY
MAX
(MÁX.)
M
Figure 11
(Encendedor)
Figure 12
IGNITOR
1 AAA
1.5V
08
Advertisement
Table of Contents
