Afterglow F210004-B2 Manual page 5

1. Carefully unpack all parts from the box, compare parts with package content listed above, make sure all parts are
present before beginning assembly of product. If any part is missing or damaged, do not attempt to assemble the
product. Contact customer service for replacement parts.
2. Attach back-left leg (G) and back-right leg (H) and front-left leg (J) and front-right leg (I) to table top assembly (B)
with bolts (AA) and washer (CC) by using hex screw driver (DD), (see Figure 2).
NOTE: DO NOT tighten the screws completely.
Hardware Used:
AA Bolts (M6 x 12)
CC Washer (M6)
DD Hex screw driver
3. Attach left panel (D) to back-left leg (G) and front-left leg (J) with bolts (AA) and washer (CC) using hex screw
driver (DD), (see Figure 3).
NOTE: DO NOT tighten the screws completely.
Hardware Used:
AA Bolts (M6 x 12)
CC Washer (M6)
DD Hex screw driver
4. Attach front panel (F) to front-left leg (J) and front-right leg (I) with bolts (AA) and washer (CC) using hex screw
driver (DD), (see Figure 4).
NOTE: DO NOT tighten the screws completely.
Hardware Used:
AA Bolts (M6 x 12)
CC Washer (M6)
DD Hex screw driver
ASSEMBLY INSTRUCTIONS
x 4
x 4
x 1
x 4
x 4
x 1
x 4
x 4
x 1
G
DD
AA
CC
D
G
J
H
Figure 2
DD
AA
CC
J
Figure 3
J
DD
F
CC
I
Figure 4
I
B
AA
05