Table of Contents
Advertisement
Troubleshooting
Symptom
No power.
* The power cord is disconnected.
* Plug the power cord into the wall
outlet securely.
No sound.
* The power of the external source
* Switch on the external source
equipment is switched off.
equipment.
The unit does not|*
No disc or tape is inserted.
* Insert a disc or tape.
start playback.
* An unplayable disc or tape is inserted.
|e Insert a playable disc or tape.
* The disc is placed upside down.
* Place the disc with the playback side
down.
* The disc is not placed within the guide.
|e Place the disc on the disc tray
correctly inside the guide.
* The disc is dirty.
* Clean the disc.
The remote con-
|* The remote control is not pointed at the |e Point the remote control at the
trol does not
remote sensor of the unit.
remote sensor of the unit.
work properly.
* The remote control is too far from the
|e Operate the remote control
unit.
within about 23 ft (7 m).
* There is an obstacle in the path of the
|e Remove the obstacle.
remote control and the unit.
* The batteries in the remote
* Replace the batteries with new ones.
control are exhausted.
Advertisement
Table of Contents
