Motorola moto razr 2022 User Manual page 184

Settings : Network and internet
1. Get the MAC addresses of the devices you want to allow to connect. (Connect devices to the hotspot
normally, then go to Manage devices, and tap the name of each connected device to view its MAC
address.)
2. Tap Manage allowed devices > Add allowed device.
3. For each device, enter the MAC address and device name.
4. Once you add allowed devices, they are saved unless you delete them, and you can turn this feature on
and off by checking or unchecking Allow all devices any time.
To restrict access for a previously allowed device, tap the device name, then tap Delete.
Hotspot: View or change password
1. Go to Settings > Network & internet > Hotspot & tethering.
2. Tap Wi-Fi hotspot.
3. Tap Hotspot password to see the current password.
4. To change the password, type over the current password.
Note: Although you can turn off passwords for your hotspot, keeping a password prevents unauthorized
usage of your cellular data.
Hotspot: Manage security
If you're getting a warning about weak security for your hotspot,
secure your hotspot by selecting a protocol:
1. Go to Settings > Network & internet > Hotspot & tethering > Wi-Fi hotspot.
2. Tap Security.
3. Adjust settings:
•
WP3 is the most secure choice.
•
Choose WPA2/WPA3 for newer devices (made after July 2020). Older devices may not be able to
connect to a WPA3 or WPA2/WPA3 mixed network.
• Choose WPA2 (AES) for the widest compatibility with both current and older devices.
•
Don't use None for this setting.
USB tethering
To connect a device to the internet using your phone's cellular data and a USB cable:
1. Check that cellular data is
share.
2. Connect your phone to your computer with a USB cable.
3. On your phone, go to Settings.
4. Tap Network & internet > Hotspot & tethering.
5. Turn on USB tethering to start the connection.
You'll see in your notifications.
on. If cellular data is off, your phone doesn't have an internet connection to
set a strong hotspot
175
password. Also,