Page 1
Power analysis (Active, Apparent and Reactive power) port or Bluetooth® Energy analysis (Active, Apparent and Reactive energy) Synchronous measurements between two units of KEW 6305 Active power accuracy: ±0.3%rdg±0.2%f.s. Wide selection of clamp sensors allow measurements from 0.1 to 3000A...
Page 2
Real-time and remote measureme Real-time and remote measureme Two units of KEW 6305 can be used simultaneously and perform synchronous measurements on 2 power lines. Measurements can be displayed in graphic or nu- PC software application can synchronize recording intervals and internal clocks of two KEW 6305 via Bluetooth meric forms on Android™...
Page 3
Data can be saved on SD card or transferred to a PC Data transmission via USB Data transmission via USB Data saved on an SD card or internal memory of KEW 6305 can be directly transferred to a PC via USB. USB ver. 2.0 is supported. SD card Interface...
Page 4
Current range 10.00/50.00/100.0/250.0/500.0A/Auto (with clamp sensor 8125) If your KEW 6305 has an earlier serial number than the one listed above, accuracy ±0.2%rdg±0.2%f.s.+ Accuracy of Clamp sensor (sine wave, 45 to 65Hz) will not be guaranteed when two or more KEW 8135 are connected with KEW 6305.
Need help?
Do you have a question about the KEW 6305 and is the answer not in the manual?
Questions and answers