Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Champion Autolift Manuals
  4. Lifting Systems
  5. TR10
  6. Installation manual

Champion Autolift TR10 Installation Manual

Triple stack
Hide thumbs

Advertisement

Quick Links

Download this manual
INSTALLATION MANUAL
1,INTRODUCTION___________________02
2,SPECIFICATIONS__________________03
3,SAFETY INSTRUCTION_____________04
4,SITE PLANNING___________________07
5,INSTALL_________________________ 07
6,MAINTENANCE___________________ 14
Champion Distributors LLC
1

Advertisement

loading

Related Manuals for Champion Autolift TR10

Summary of Contents for Champion Autolift TR10

  • Page 1: Table Of Contents

    INSTALLATION MANUAL 1,INTRODUCTION___________________02 2,SPECIFICATIONS__________________03 3,SAFETY INSTRUCTION_____________04 4,SITE PLANNING___________________07 5,INSTALL_________________________ 07 6,MAINTENANCE___________________ 14 Champion Distributors LLC...

  • Page 2: 1,Introduction

    1,INTRODUCTION TR10 triple four post parking lift is used for car storage and parking to save space.  Both levels use the same posts. Simple design.  There is a locking position for each 100mm distance.  You can vary the height of the various parking spaces.

  • Page 3: 2,Specifications

    2,SPECIFICATION *Lifting capacity:5000lbs for each level,totally 10000lbs. *Lifting height:lower platform-65.35in, upper platform-137.52in *Runway length:180in *Runway width:18.6in *Width between runways:37.4in Champion Distributors LLC...

  • Page 4: 3,Safety Instruction

    3,SAFETY INSTRUCTION Do not install, operate, maintain, or repair the unit without reading and understanding this manual and the labels on the unit. • Follow all installation, operation, and maintenance instructions. • Make sure product installation conforms to all applicable local, state, and federal codes, rules, and regulations.
  • Page 5 • Use it only for its intended purpose. • You must wear personal protective equipment at all times when installing, using, maintaining, or repairing the Lift: leather gloves, steel-toed work boots, eye protection, back belts, and hearing protection are mandatory. •...
  • Page 6 Enter the Model Number, Serial Number, and the Date of Manufacture from the label on your unit. This information is required for part or warranty issues. Model: _______________________________________________ Serial: _______________________________________________ Date of Manufacture:____________________________________ 3.1.WARRANTY. 5 years warranty for the main structure and one year for the parts and accessories.

  • Page 7: 4,Site Planning

    4,SITE PLANNING 4.1.FLOOR.Only install the Lift on a flat, concrete floor; do not install on asphalt or any other surface.The surface must be level; do not install if the surface has more than three degrees of slope. Installing your Lift on a surface with more than three degrees of slope could lead to injury or even death;...
  • Page 8 5.1.Necessary tools. Non-adjustable Forklift with 3T capacity Some power line Chalk lines spanner-1 set Adjustable spanner Percussion hammer -1 set drilling(12*200 aiguille) Allen wrench-1 set Electric portable drill Duster cloth Screwdrivers(both Insulated rubber tape Grease gun slotted phillips types)-1 set Leveling instrument for Sealing tape Tapeline for 5M...
  • Page 9 5.3.Unloading and Unpacking. As the Lift includes a number of heavy pieces, the closer you unload them to the installation location, the better off you are. You must have a Forklift or Shop Crane to move them into position. Use care when moving them.Be very careful when removing the Posts and Runways which can shift or even fall.
  • Page 10 5.4.2.Lay the posts on ground carefully,and connect the cross beams of both upper and lower platforms. Your Lift has a total of four Crossbeams, two per Platform.You need to manually raise the Crossbeam for each Platform, which makes it easier to complete the rest of the installation tasks.The Front and Rear Crossbeam need to be raised the same height, to the same Safety Lock.
  • Page 11 5.4.3.Stand up the posts. Erect the posts and locate them precisely as per the chalk lines.And insert 2 diagonal anchor bolts for each post,but do not tighten at this step.You must have at least two people work together to stand up the Posts; one controlling the Forklift, and the other positioning the Posts.
  • Page 12 5.4.5.Install side beams and wire the steel ropes. Connect the front and rear posts with side beams.But do not fasten for now. 5.4.6.Install hydraulic, air line and circuit. Fill with standard hydraulic oil. During the subsequent leveling of the lift, the hydraulic oil in the power unit may drop.
  • Page 13 5.4.7.Adjustment and test for the lift. ①Check all gas and liquid channels to ensure proper and accurate connection. Turn on the power and turn the power switch on state. Turn on raising, pay attention to the position of the wire rope and make sure it is correct, and whether there are other people or objects to interfere with the raising.

  • Page 14: 6,Maintenance

    6、EQUIPMENT MAINTENANCE SERVICE Per month for regular maintenance, to ensure that the use of safety equipment, prolong use life. 6.1 Check power supply, line, if normal work. 6.2 Check the expansion bolt. If loose, it should be tightened. 6.3 Check the column whether it is deformation, check column whether is perpendicular to the ground, if overload and abnormal use lead to serious deformation of column, should stop operating equipment.
  • Page 15 Champion Distributors LLC...