Advertisement
Available languages
Available languages
ULTRA GAIN SWITCH (13)
Boosts the overall system gain of the Ultra channel. Depress to the "in" position to activate.
POST GAIN (14)
Controls the overall volume level of the channel. The final level adjustment should be made after the desired
sound has been achieved.
PRE GAIN (15)
Controls the input volume level of the channel.
LOW, MID, & HIGH EQ (16)
Passive tone controls that regulate the low, mid and high frequencies, respectively.
CHANNEL SELECT SWITCH (17)
Allow's selection of the Ultra or Clean channel and the "out" position selects Clean.
NOTE: Channel selection may also be accomplished by the remote footswitch. If remote selection is desired,
the channel switch must be in the "in" (Ultra) position.
BRIGHT SW ITCH (18)
Provides a preset boost to treble frequencies. To activate, depress the switch to its "in" position. The bright
function affects only the Clean channel.
CLEAN GAIN (19)
Controls the channel volume.
LOW^ GAIN INPUT (20)
Provided for instruments that have extremely high outputs, which can result in overdriving (distorting) the
High Gain input. If both inputs are used simultaneously, the output levels are the same (both are Low Gain).
HIGH GAIN INPUT (21)
Used for most electric guitars. It is 6 dB louder than the Low Gain input.
22
23
24
25
26
27
28
SPEAKER OUTPUTS (22)
Speaker output
{Va")
Jacks are provided for 4 ohms, 8 ohms, and 16 ohms. When the 8 and 16 ohm jacks
are engaged, amplifier impedance is 8 ohms. When the 4 and 8 ohm jacks are engaged, amplifier impedance
is 4 ohms.
REMOTE FOOTSW ITCH JACK (23)
Provided for the connection of the supplied remote footswitch. Footswitch is used to select the Ultra Gain,
Crunch Gain, or Normal Channels and defeat reverb.
Advertisement
