Error Messages - Yamaha VL-1 Feature Reference

Error Messages

When an operational error or other problem occurs, the VL1 will display one of the
following error messages to inform you of the problem.
Display
Bad disk!
Change battery!
Data not found!
Device number is off!
Device number mismatch!
Disk full!
Disk not formatted!
Disk not ready!
File not found!
Feature Reference Appendix
The loaded floppy disk is damaged. Try a different disk.
The voice backup battery needs to be replaced. Have the battery
replaced by qualified Yamaha service personnel.
The specified data cannot be found on the currently loaded
floppy disk, or different data is loaded. Make sure the appropriate
disk is loaded.
MIDI bulk data could not be transmitted or received because the
device number parameter is turned off. Check the device number
setting.
MIDI bulk data could not be transmitted or received because the
device number of the VL1 is not matched to that of the second
device. Check the device number settings.
Data cannot be saved to floppy disk because the currently
loaded disk is full. Delete unwanted files to make more space on
the disk, or use a different disk.
The currently loaded floppy disk has not been formated for use
with the VL1. Format the disk before performing any disk opera-
tions.
You have attempted to perform a disk operation while no floppy
disk is loaded. Insert an appropriate floppy disk in the disk drive.
The specified file cannot be found on the currently loaded floppy
disk. Check the file name or use the appropriate disk.
182
Comments