IBM System/36 5360 Manual page 60

48
•
•
If the IBM 5251 Display Station Model 11 has address
switches, go to
lllJ .
If not, replace the access cover and set the Power switch
to I (On). If you have another display station or printer to
connect, return to
1111 .
• If you have connected all of the display stations and
printers, go to
Section 5: Checking Out Your System.
•
•
If the 5256 or the 5225 Printer that you are working with
has address switches, go to
lllJ .
If not, set the Power switch to I (On). If you have another
display station or printer to connect, return to
1111
• If you have connected all of the display stations and
printers, go to Section 5: Checking Out Your System.
IBM 5251 Model 11
Access Cover
Address Switches
If a work station does not have address
switches, the address is automatically set to 0
by the computer.