Table of Contents
Advertisement
······~
Preparing the IBM 5225 Printer for System Checkout:
1.
Set the Power switch on the 5225 Printer to the 0 (Off)
position.
2.
Set the Mode switch to the On Line position.
3.
Set the Power switch to the I (On) position
.
4.
5.
Wait for the 5225 Attention light to come on; then, several
characters are displayed on the 5225 operator panel for a
short
time.
When the power-on test
is
complete, the 5225
Attention light will be on and the 5225 display will be blank,
or show the letter C or D.
Press the Start key.
This
turns on the
Ready light. Your printer is ready for
system checkout.
Do you have another
4214
Model 2, 5219, 5224, 5225,
5256, or 5262 Model 1 Printer to prepare for system
checkout?
YES
-
-
•
-
• •
•
-
-
-
• •
-
' Y
NO
-
- -
-
•
-
..
Go to the next printer and prepare it for system checkout.
Be sure the 5225 Printer is set up.
The Mode switch
is
inside
the
front cover
.
-
Start Key
Power Switch
Mode Switch
0
If a problem occurs, refer
to Solving Printer
Problems in the IBM 5225 Printer Operator's
Guide.
111111~
Section 8.J Continued
Responding to System Reference Codes and Other Problems
183
•
Advertisement
Table of Contents
