Table of Contents
Advertisement
-
-
12
Remove and plug in the power cord.
•
•
........
Power Cord
Push In and Turn
Push the Circuit Breaker switch
up.
Make sure that the Unit Emergency switch is set to the
Power Enable position.
~---~:-
·
'
• •
• •
The power plug is a locking plug and must be
turned clockwise after it is pushed in.
For World Trade
Countries:
The power plug cannot be twisted to the right
after it is plugged in
.
If for some reason the power cord does not fit
the socket, do the necessary changes in
accordance with the local safety regulations
.
After the Unit Emergency switch is set to the
Power Enable
position,
use this switch only
during an emergency to turn off the
computer.
Advertisement
Table of Contents
