Advertisement
Disc Repeat
The Disc Repeat function causes the same
disc to play repeatedly.
1.Press button [17] for 2 seconds or more
while the desired disc is being played.
The mode will change to Disc Repeat
mode ("D.RPT" [36] appears).
2.To cancel Disc Repeat, again, press but-
ton [17] for 2 seconds or more and turn
off "D.RPT" at [36].
Using Fast Forward and Reverse
1.Press simultaneously both (+) and (-)
sides of the button [7].
At this time the display will show the
amount of elapsed disc play time.
2.Press the (+) side of button [7] for fast for-
ward, and the (-) side for reverse.
* Sound is output during fast forward and
reverse operations.
The display counts down the number of
seconds between tracks if the spacing is
rather large (-'00"-'01").
Using Program Play
This function lets you program the play se-
quence of all of the tracks contained on the
compact discs loaded in the magazine.
The ITP function will not operate when
connected to either the CDX-M70 or CDX-
M100.
Up to 32 selections can be programmed
for a single magazine.
Up to 16 different magazines (max. 32 se-
lections per magazine) can be pro-
grammed individually. If you program
more than 16 magazines, old programs
are automatically replaced by new ones.
Automatic Magazine Program Selection
(AMPS) retrieves the right program from
the memory automatically, as soon as a
preprogrammed magazine is loaded.
Preprogrammed magazines are identified
using the CD in the tray 1 of the maga-
zine. Therefore be sure that tray 1 con-
tains a disc.
Programming
1.While a disc is playing, select the desired
disc and track you want to program.
2.Press button [15] to memorize the track
being played.
("P-01" is indicated during the memory
step.)
3.Procedures 1 and 2 above can be repeat-
ed until a maximum of 32 steps are pro-
grammed.
* If the 33rd step is selected, the "FULL"
display will appear, indicating that no
more selections can be programmed.
+ When there are already a number of se-
lections in the memory, the new selection
will be added to the last step.
Playing Back the Program
1.Hold down button [15] for 2 seconds to
begin play in the programmed sequence,
while a disc is playing.
("PP01" is indicated during the step
where the program is played.)
2.Press button [15] again to cancel program
play.
* Pressing the (+) or (-) side of button [7]
during programmed play makes it possi-
ble to search for a specific step number
from among the programmed selections.
Program play returns to the first step in
the programmed sequence when it reach-
es the end of the program.
* When playing a magazine that has no
program recorded, "PP0OO" will be dis-
played for approximately 3 seconds.
Erasing the Program
It is possible to erase one or all selections
of the program in the magazine being
played.
To erase a single selection:
1.Press the (+) or (-) side of button [7] dur-
ing programmed play, and search for the
specific step you wish to erase.
2.Press button [6] for at least 2 seconds and
the selection being played will be erased.
* After the particular track has been erased,
the tracks in the next position move from
down up one notch in the order from the
previous position.
To erase the entire program:
While a disc is playing, hold down button
[6] for at least 2 seconds. All the programs
in the magazine being played will be
erased.
("P-CL" is indicated on the display.)
13
Advertisement
