Safety Information; Safety Precautions; Product Safety Notice - Pioneer PD-P920M Service Manual

PD-PS20Mi
aching Ee
any smoke or fumes produced.
1. SAFETY INFORMATION
(FOR USA MODEL ONLY)
1. SAFETY PRECAUTIONS
The following check should be performed for the
continued protection of the customer and service
technician.
LEAKAGE CURRENT CHECK
Measure leakage current to a known saith. ground
(water pipe, conduit, etc.) by connecting a leakage
Current tester such as Simpson Model 229-2 or
equivalent between the earth ground and all exposed
metal parts of the appliance (input/output terminals,
screwheads, metal overlays, control shaft, etc.). Plug
the AC line cord of the appliance directly into a 120V
AC 60Hz outlet and turn the AC power switch on. Any
current measured must not exceed 0.5mA.
Reading should
Leakage not be above
current | 0-5MA
tester
Device
under
Test all ahs
exposed metal
surfaces
2-wire cord:
Also test with
plug reversed
(Using AC adapter ground
plug as required)
AC Leakage Test
ANY MEASUREMENTS NOT WITHIN THE LIMITS
OUTLINED ABOVE ARE INDICATIVE OF A PO-
TENTIAL SHOCK HAZARD AND MUST BE COR-
RECTED BEFORE RETURNING THE APPLIANCE TO
THE CUSTOMER.
2.PRODUCT SAFETY NOTICE