Pioneer PD-P920M Service Manual page 8

1?)
4.2 MULTI MECHANISM ASSEMBLY
*1: Fix the motor on-the loading board assembly so that
the label attached on the motor faces the direction illustrated.
*1 Label
mee oe eee YF
*2: Fix the moto on the motor board
assembly so that the label
attached on the motor faces the
direction illustrated.
How to install the disc table
[1] Use nippers or other tool to cut the two sections
marked ® and the three sections marked @ in
figure [1]. Then remove the spacer.
[2] While supporting the spindle motor shaft with ~
the stopper, put spacer on top of yoke M, and
stick the disc table on top (takes about 9kg press-
ure). Take off the spacer.
Spindle motor. Spacer setting