Specifications - Yamaha SPX2000 Owner's Manual

Input/Output Characteristics
Analog Input Characteristics
Input Terminals Level SW
+4 dBu
INPUT L, R
–10 dBu
Input Terminals Level SW
+4 dBu
INPUT L, R
–10 dBu
*1 Sensitivity is the lowest level that will produce an output of +4dB(1.23V) or the nominal output level when the unit is
set to maximum gain.(level control is maximum position.)
*2 XLR-3-31 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*3 Phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*4 In these specifications, when dBu represents are specific voltage, 0 dBu is referenced to 0.775 Vrms.
*5 AD converter is 24-bit linear,128-times oversampling @Fs=44.1, 48 kHz, 64-times oversampling @Fs=88.2, 96 kHz
Analog Output Characteristics
Actual
Output Terminals Source
Impedance
OUTPUT L, R 150 Ω
*1 XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*2 Phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*3 In these specifications, when dBu represents are specific voltage, 0 dBu is referenced to 0.775 Vrms.
*4 DA converter is 24-bit, 128-times oversampling @Fs=44.1, 48 kHz, 64-times oversampling @Fs=88.2, 96 kHz
Digital Input Characteristics
Input Terminals
AES/EBU IN
*1 XLR-3-31 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
Digital Output Characteristics
Output Terminals
AES/EBU OUT AES/EBU Professional use
*1 channel status of AES/EBU OUT
type: 2 audio channels
emphasis: NO
sampling frequency: depends on the internal configuration
*2 dither: word length 16 - 24-bit
*3 XLR-3-32 type connector is balanced. (1=GND, 2=HOT, 3=COLD)
Control I/O Characteristics
Terminals
USB TO HOST
IN
MIDI
OUT/THRU
WORD CLOCK IN
100
SPX2000—Owner's Manual
Actual
Input Level
Load
VR.
Impedance
Max.:
+10 dB
10 k Ω
Max.:
+10 dB
Actual
Input Level
Load
VR.
Impedance
Nominal:
0 dB
10 k Ω
Nominal:
0 dB
For Use With
Level SW
Nominal
+4 dBu
600 Ω Lines
–10 dBu
Format Data Length
AES/EBU 24-bit
Format Data Length
24-bit
Format
USB 1.1
MIDI
MIDI
—
Input Level
For Use With
Nominal
Sensitivity
–6 dBu
(0.388 V)
600 Ω
Lines
–20 dBu
(0.0775 V)
Input Level
For Use With
Nominal
Sensitivity
—
600 Ω
Lines
—
Output Level
Max.
Nominal
before clip
+4 dBu +24 dBu
(1.23V) (12.28V)
–10 dBu +10 dBu
(0.245V) (2.45V)
Level
RS422
Level
RS422
Level
0 to 3.3 V
—
—
TTL/75 Ω
Max.
Nominal
before clip
+14 dBu XLR-3-31 type
—
(3.88 V) (Balanced)
0 dBu Phone jack
—
(0.775 V) (TRS: Balanced)
Max.
Nominal
before clip
+4 dBu + 24 dBu XLR-3-31 type
(1.23V) (12.28 V) (Balanced)
–10 dBu +10 dBu Phone jack
(0.245V) (2.45 V) (TRS: Balanced)
Connector
XLR-3-32 type (Balanced)
Phone jack (TRS: Balanced)
Connector
XLR-3-31 type (Balanced)
Connector
XLR-3-32 type (Balanced)
Connector
B type USB Connector
DIN Connector 5P
DIN Connector 5P
BNC Connector
Connector
Connector