Connecting A Microphone Or Other Audio Equipment - Yamaha S-80 Owner's Manual

Connecting a pair of headphones does not affect audio output from the OUTPUT (L/MONO and R) jacks.
You can monitor the same sounds via headphones and at the OUTPUT jacks. However, you cannot monitor the
sounds from INDIVIDUAL OUTPUT 1 and 2 with headphones.

Connecting a Microphone or Other Audio Equipment

When an A/D Input Part is used in a Performance, signals from devices connected to either of these
jacks can be input in mono.
After the above connections are complete, you are ready to set up for recording. When starting a recording, you
may need to adjust the input gain of the audio source using the GAIN knob. Details about A/D Input, including
how to adjust the input gain, are given on Pages 63, 119.
If you choose the wrong type of input source (Pages 119, 120), you may possibly damage your hearing and/or any
connected audio equipment. Make sure you set this parameter correctly.
Before connecting a device to the A/D INPUT jack, always turn the GAIN knob all the way down.
You can connect an external audio source to the A/D Input Part and use it as a Part in a Performance. Details are
given on Pages 63, 119.
L
Mixer
OUTPUT L
Headphones
1 2 3 4 5 6 7 8 9 10
OUTPUT L / INDIVIDUAL
R
PHONES MONO
S80
CD Player or other audio equipment
(merged to mono internally)
Microphone
(mono devices)
A/D INPUT
S80
14
Speaker
Amplifier
R
R
11 12 13 14 15 16 L R
INDIVIDUAL
OUTPUT1 OUTPUT2