Yamaha S-80 Owner's Manual page 116

Yamaha s-80 synthesizer: owners manual
Hide thumbs Also See for S-80:
Table of Contents

Advertisement

CTL Assign1(Controller Assign 1)
Use Knobs [C], [1] and [2] to assign Control Numbers
to the Breath Controller, Knob [1] and Knob [2],
respectively. The selected function is shown on the left
of the display.
Control Change Name
SHIFT
PAGE
A
B
PART/ELEMENT
BC (Breath Controller)
Set Control Change Number assigned to the Breath
Controller. The Breath Controller is connected to
the BREATH jack (Page 18).
Settings: Details are given in the separate Control List.
Knob1/2
Set Control Change Numbers assigned to Knobs [1]
and [2] on the front panel.
CTL Assign2 (Controller Assign 2)
Use Knobs [C] and [1] to assign Control Change
Numbers to the Foot Controller and Ribbon Controller,
respectively. The selected function is shown on the left
of the display.
Control Change Name
SHIFT
PAGE
A
B
PART/ELEMENT
FC (Foot Controller)
Assign a Controller Change Number to the Foot
Controller. The Foot Controller is connected to the
FOOT CONTROLLER jack on the rear panel (Page 18).
Settings: Details are given in the separate Control List.
RB (Ribbon Controller)
Assign a Control Change Number to the Ribbon
Controller.
Settings: Details are given in the separate Control List.
Control Change Numbers
C
1
2
DATA
Control Change
Number
C
1
2
DATA
Common EQ (Equalizer)
You can assign any of five different Equalizer bands to
the entire Performance. The following five screens are
available.
EQ Low
EQ LowMid (Low-Middle Range)
EQ Mid (Middle Range)
EQ HighMid (High-Middle Range)
EQ High
Q (Frequency Characteristic)
Gai n
0
EQ Low
This Equalizer covers low frequencies. You can adjust
the signal level at the specified frequency. You can also
select different Equalizer types (Shapes).
Shape
Select either a Shelving or Peaking equalizer. The
Peaking type attenuates/boosts the signal at the
specified Frequency setting, whereas the Shelving
type attenuates/boosts the signal at frequencies
above or below the specified Frequency setting.
Settings: shelv (Shelving), peak (Peaking)
shelv (Shelving)
+
0
EQ Low
Freq1
116
Freq (Frequency)
EQ Low
Frequency
Freq2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents