Alpha Pro Tec 48NX Design, Installation And Servicing Instructions page 8

Wall mounted, fan assisted, room sealed, gas fired, high efficiency condensing combination boiler
Table of Contents

Advertisement

Before installing the appliance, ensure that it is delivered in perfect condition; if in doubt, contact the supplier immediately.
Packing materials (staples, nails, plastic bags, polystyrene foam, etc.) constitute a hazard and must be kept out of the reach of
children.
If the appliance is installed inside or between cabinets, ensure sufficient space for routine servicing; for minimum installation
distances, see Fig. 5.
Installation standards
This type of installation is possible when permitted by the laws in force in the appliance's country of destination.
Installation of gas appliances, flue exhaust pipes and combustion air intake pipes is forbidden
in places with a fire risk (for example: garages, closed parking stalls), and in potentially
dangerous places.
Do not install in places/rooms that constitute public areas of apartment buildings, internal
stairways or other escape routes (e.g. floor landings, entrance halls, etc.).
These appliances, if not adequately isolated, are not suitable for installation on walls of
combustible material.
Wall mounting of the appliance must guarantee stable and efficient support for the generator.
The hex head screws supplied in the blister pack are to be used exclusively to fix the relative
mounting bracket to the wall.
These appliances are used to heat water to below boiling temperature in atmospheric pressure.
They must be attached to a heating system suitable for their capacity and voltage.
8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pro Tec 48NX and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Pro tec 68nx

Table of Contents