Yamaha CDC-805 RS Owner's Manual page 16

Notes
ө п the relay play, one unit is in the "functioning" mode
and the other in the "waiting" mode.
* The display like this shows that the unit is in the
"waiting" mode.
e in the "SINGLE" disc play-mode, a waiting time for the
alternation of discs is shorter than the "ALL" disc play-
mode.
€ By setting the power of one unit off, you can activate
another unit normally (without relay play).
€ The OUTPUT LEVEL control, disc play MODE-select
button and DIGITAL EQUALIZER buttons of each unit
can be set respectively.
To begin play from a desired disc
Press the corresponding DISC-select button on the
corresponding unit.
Program play (in the relay play)
In the "ALL" disc play-mode, program play is performed in
each unit. |
In the "SINGLE" disc play-mode, only the programmed
disc in each unit is played with that program data.
If the "FILE" indicator is illuminated, only discs which have
their own program data in the memory's file are played
with the program data.
Random-sequence play
(in the relay play)
In the "SINGLE" disc play-mode, random- -sequence play is
performed in each disc.
In the "ALL" disc play-mode, random- "sequence play is
performed in all discs of each unit.
Repeat play (in the relay play)
When a unit is in the repeat-play mode, relay play can
not be performed.
the main unit
the 2nd unit
* |f any DISC-select button for the "waiting" unit is
pressed, play will begin from the corresponding disc.
* |n the stop mode, you can switch a unit from the
"waiting" to the "functioning" mode by pressing the
STOP button. In the play mode, press the STOP button
twice.
16
DISC-select buttons for
DISC-select buttons for