Yamaha CDC-805 RS Owner's Manual page 14

14
You can play any desired track or disc (set of discs) repeatedly by pressing the REPEAT button. The repeat-play mode
will change whenever you press the REPEAT button.
DISG MODE
SINGLE
OFF
ш
DISG MODE SINGLE REPEAT
SINGLE ALL
DISE MODE FULL REPEAT
SINGLE ALL
SINGLE REPEAT
Only a designated track is played repeatedly.
FULL REPEAT
In the "SINGLE" disc play mode: A designated disc is
played repeatedly.
In the "ALL" disc play mode: All discs in the disc tray are
played repeatedly.
Notes:
e Repeat play can be activated in both the play mode
and stop mode.
® Repeat play is also possible during the programmed-
play mode, the random-sequence play mode.
if the disc includes index numbers, play can be started from any desired index number.
1 In the pause or stop mode, select a track
which has index numbers.
<<] SKIP Dot
3 Select the desired index number.
Saesaheaaas
To cancel the index search function
Press the INDEX button.
Notes
e Some discs have index numbers, and some do not. The
index system is a method for sub-dividing tracks into
smaller divisions (such as, for example, the movements
within classical symphonies) for easier location of those
parts. The liner notes with the disc usually tell if such
index numbers are includec.
e If an index number is selected that is higher than any
index number on that disc, play will start from the last
index number point on the disc.
e For some discs, play may begin slightly prior to the
actual designated index point.
e If the disc has no encoded index points, play will begin
from the start of the track selected by using the SKIP
button.
~ The index number can be designated only while the
INDEX number display is illuminated.