Download Print this page

Yamaha 502 Owner's Manual

Natural sound compact disc player.
Hide thumbs

Advertisement

CDC-902/502
Lecteur de disque audionumérique de la série "Natural Sound"
Thank you for selecting this YAMAHA Compact Disc Player.
Nous vous remercions d'avoir porté votre choix sur ce lecteur de disque
audionumérique YAMAHA.
OWNER'S MANUAL
CONTENTS
Safety Instructions.................................................. 2
Features ................................................................. 4
Connections ........................................................... 5
Identification of Components ................................. 6
Basic Operation ..................................................... 8
Random-Sequence Play ...................................... 13
Program Play ....................................................... 14
Repeat Play.......................................................... 16
Index Search ........................................................ 16
CD Synchronized Recording.................................17
............................................. 18
Transmitter ........................................................... 22
Troubleshooting.................................................... 23
Specifications....................................................... 23
Natural Sound Compact Disc Player
MODE D'EMPLOI
TABLE DES MATIERES
Caractéristiques .................................................. 24
Attention ............................................................. 25
Connexions ......................................................... 26
Identification des composants ............................ 27
Fonctionnement de base .................................... 29
Lecture en séquence aléatoire ........................... 34
Lecture programmée .......................................... 35
Lecture repetée .................................................. 37
Recherche d'index .............................................. 37
Enregistrement synchronise d'un
disque audionumérique ........................................38
Programmation des plages pour
enregistrement sur bande
CDC-902 seulement
Remarques concernant la télécommande .......... 43
Remarques concernant la manipulation des disques .... 43
Dépistage de pannes .......................................... 44
Caractéristiques techniques ............................... 44
........................................ 39

Advertisement

   Related Manuals for Yamaha 502

   Summary of Contents for Yamaha 502

  • Page 1: Table Of Contents

    CDC-902/502 Lecteur de disque audionumérique de la série “Natural Sound” Thank you for selecting this YAMAHA Compact Disc Player. Nous vous remercions d’avoir porté votre choix sur ce lecteur de disque audionumérique YAMAHA. OWNER’S MANUAL CONTENTS Safety Instructions... 2 Features ... 4 Connections ...

  • Page 2: Safety Instructions

    SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous...

  • Page 3

    (for US customers only) often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.

  • Page 4: Features

    This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT : When connecting this product to accessories and/or another product use only high quality shielded cables.

  • Page 5: Connections

    Adjust the level of signals output into an amplifier, etc. by using the OUTPUT LEVEL button. CONNECTIONS If the placement of this unit causes noise to other equipment, such as a tuner, separate them from each other. CDC-502 LINE OUT DIGITAL AUDIO OPTICAL...

  • Page 6: Identification Of Components

    POWER switch (p. 8) NATURAL SOUND COMPACT DISC PLAYER AUTO DISPLAY OFF POWER Remote control sensor (p. 22) CDC-502 POWER switch (p. 8) NATURAL SOUND COMPACT DISC PLAYER POWER * The the functions of the PLAY button and the PAUSE button on the remote control transmitter.

  • Page 7: Remote Control Transmitter

    ) indicates the page number on which the control button is best described. REMOTE CONTROL TRANSMITTER SYNCHRO button (p. 17) Numeric buttons (p. 10) Disc play MODE-select button (p. 8) DISC SCAN button (p. 11) DISC SKIP button (p. 8) CDC-902 only OUTPUT LEVEL button (p.

  • Page 8: Basic Operation

    “5DISC” mode: The unit will play all discs on the tray in Disc tray * If necessary, select a desired disc by using the DISC SKIP OPEN/ CLOSE To turn off the power Press the POWER switch again. CDC-502 2, 3 SYNCHRO DIMMER TIME CLEAR DISC SCAN...

  • Page 9

    Notes After closing the disc tray by pressing the OPEN/CLOSE button when this unit is stopped or after selecting any disc by using the DISC SKIP button when this unit is stopped, the display shows the total number of tracks and the total recorded time of the selected disc for a few seconds.

  • Page 10: To Play A Desired Track On The Disc

    DIRECT PLAY Select a desired track by using the numeric buttons. 1DISC 5 6 7 8 9 10 1 1 1 2 Example: To select track 25 Press twice, then immediately press * If a track number higher than the highest track number on the disc is selected, the last track on the disc will be played.

  • Page 11

    Scanning discs to search for a desired disc (or to check discs on the disc tray) When the DISC SCAN button is pressed when this unit is stopped, this unit will play an initial part of each disc in turn. Each disc is played for 8 seconds.

  • Page 12: Changing Brightness Of The Display

    Changing brightness of the display If desired, you can change brightness of the display in three degrees by pressing the DIMMER button. CDC-902 only Adjusting the level of signals output into an amplifier, etc. You can adjust the level of sound signals output from the LINE OUT terminals on the rear panel into an amplifier, etc.

  • Page 13: Random-sequence Play

    If the SKIP play, the next randomly programmed track will be played. If the SKIP beginning of the track now being played. Total remaining time on the disc will not be displayed during random-sequence play. CDC-502 OPEN/ SYNCHRO DIMMER TIME CLOSE...

  • Page 14: Program Play

    TIME CLOSE TAPE CLEAR PROG INDEX REPEAT RANDOM SEARCH SKIP PAUSE PLAY DISC SKIP PROG TOTAL CDC-502 SYNCHRO DIMMER TIME CLEAR DISC SCAN MODE REPEAT 2, 4 DISC SKIP SEARCH SKIP STOP PAUSE PLAY If necessary, select a desired disc.

  • Page 15

    Display information during programming PROG TOTAL PROG TOTAL Shows the program number for the track to be programmed next. Shows the selected disc and track number. Shows the total time of the tracks currently programmed. Shows only the numbers of programmed tracks on the selected disc.

  • Page 16: Repeat Play

    You can play any desired track or disc (or a set of discs) repeatedly by pressing the REPEAT button. The repeat play mode will change whenever you press the REPEAT button. (OFF) If the disc includes index numbers, play can be started from any desired index number. Select a track which has index numbers.

  • Page 17: Cd Synchronized Recording

    This unit can make a tape deck’s recording synchronized with CD play automatically. With this function, you can record a CD on tape very easily and more precisely. This recording method needs a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to know whether it is compatible or not.) * This unit and the tape deck must be placed close to each other so that both of them can receive the signals from this unit’s...

  • Page 18: Track Programming For Recording To Tape

    TRACK PROGRAMMING FOR RECORDING TO TAPE This convenient feature can be used to program tracks for recording to tape. By only memorizing the tape’s total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the least amount of unrecorded space remaining at each end of the tape.

  • Page 19: Manual Tape Programming

    Manual tape programming This is for recording desired tracks selected from one or more discs in any desired order onto tape. Stop the unit. If you will select tracks from a disc (or discs) other than the disc on the Disc 1 tray, make this unit display the total recorded time of each disc to be used by pressing the DISC SKIP button in turn.

  • Page 20: Random Sequential Tape Programming

    Display information during programming 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 Random sequential tape programming The unit will automatically program tracks on a disc in random sequential order for recording to tape. Follow step 1 –...

  • Page 21: Automatic Searching For The Peak Level On A Disc

    Automatic searching for the peak level on a disc This convenient feature automatically searches a disc for a part where the source level peaks, and next plays the part repeatedly. For recording to tape, this feature is very helpful to adjust the recording level on the tape deck. OPEN/ SYNCHRO DIMMER...

  • Page 22: Notes About The Remote Control Transmitter

    To play a 3-inch (8-cm) CD Place it in the inner recessed area of the disc tray. Do not put a normal (5-inch/12-cm) CD on top of a 3-inch CD. CDC-502 Remoto control sensor Within approximately 6 m (19.7 feet) There should be no large obstacles between the remote control transmitter and the main unit.

  • Page 23: Troubleshooting

    If the unit fails to operate normally, check the following points to determine whether the problem can be corrected by the simple measures suggested. If it cannot, or if the problem is not listed in the SYMPTOM column, disconnect the unit’s power cord and contact your authorized YAMAHA dealer or service center for help. SYMPTOM This unit does not switch ON when the POWER switch is pressed.

  • Page 24

    YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN VV36110...

This manual also for:

Cdc-902, Cdc-502

Comments to this Manuals

Symbols: 0
Latest comments: