Miele EGW 4060-14 Operating Instructions Manual page 22

installation
Electrical connection
The electrical installation instructions
for any appliance installed in
combination with the plate warmer
must be observed.
When another appliance is installed
in combination with the plate warmer
to the same circuit breaker,
operating both appliances at the
same time may cause an overload. If
in doubt consult a qualified
electrician.
All electrical work should be done
by a qualified technician, in strict
accordance with national and local
safety regulations.
Insta!lation, repairs and other work
by unqualified persons could be
dangerous and may void the
warranty.
Make sure power is not supplied to
the appliance while installation or
WARNmNG:
THINS APPUANCE MUST BE
GROUNDED
Power supply
This appliance is equipped with an
approx. 6 ft (approx. !.8 m) long power
cord with plug ready for connection to a
120 V, 15 A, 60 Hz power supply.
22