Minolta MN5KGP1 Manual page 24

. Using Your Camcorder
every 10 seconds and create a video combining all of the captured
images. See the table below for how long it will take to record 1 second
of video for each option at 30fps, the length of time will be double what
is shown in the chart for 60fps;
Interval Option
2.4.2 Duration
This function allows you to set the length of the final time lapse video.
1. In Time Lapse Video Mode press and hold the OK button.
2. Select Duration using the UP or DOWN buttons.
3. Press the OK button to enter the Duration submenu.
4. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected duration (Unlimited, 5 Minutes, 10 Minutes,
15 Minutes, 20 Minutes, 30 Minutes, 60 Minutes).
5. Press the SHUTTER button to exit the settings menu.
NOTE: By selecting
recording when the final video is 5 minutes long. The actual length of
time that it will take to record the 10 second video will depend on the
interval duration, see section 2.4.1.
2.4.3 Resolution (Movie Size)
Your camcorder has a number of preset resolutions and frames per second
rates.
1. In Time Lapse Video Mode press and hold the OK button.
2. Select Resolution using the UP or DOWN buttons.
3. Press the OK button to enter the Resolution submenu.
4. Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected resolution (5K 30fps, 4K 60fps, 4K 30fps,
1 Second
3 Seconds
5 Seconds
10 Seconds
30 Seconds
1 Minute
time lapse will automatically stop
Length of time to record 1
second of video at 30fps
30 Seconds
90 Seconds
150 Seconds
300 Seconds
900 Seconds
1,800 Seconds
23