Loop Recording - Minolta MN5KGP1 Manual

.

2.3 Loop Recording

This function allows you to set a maximum duration for each video clip
recorded.
To enter Loop Recording mode, power the camcorder on and press the
POWER/MODE button to access the mode selection screen and use the UP
or DOWN buttons to select Loop Record icon and press the OK button to
enter that mode.
1. Line up your shot by looking at the LCD screen to see what is in view.
2. Hold the camcorder steady and press the SHUTTER button to begin
recording.
3. When recording begins, a rolling timer will display in red in the top left
corner of the screen. This indicates the recorded video time elapsed.
4. After the set amount of time has elapsed, the recording will end and a new
recording will start.
5. Press the SHUTTER button to stop recording.
6. The recorded video files will automatically save onto the inserted memory
card.
Your camcorder comes preset with some user-adjustable settings to fine tune
and customize how you would like your videos to be captured. The settings
are already optimized and preset for the easiest experience.
From the main screen, press and hold the OK button until you see the
settings menu on the screen. You can also tap the screen and then select the
gear icon that shows on the screen to access the settings.
2.3.1 Video File Length (Loop Duration)
This function allows you to set a maximum duration for each video clip
recorded.
In Loop Recording Mode press and hold the OK button.
Select Video File Length using the UP or DOWN buttons.
Press the OK button to enter the Video File Length submenu.
Press the UP or DOWN buttons to navigate the menu, and press the OK
button to confirm your selected option (1 Minute,
Press the SHUTTER button to exit the settings menu.
Minutes, Minutes).
18