Minolta MN4K300WP User Manual page 30

3. Using the Camcorder
2. Then press the MENU button again to enter the Setup mode.
3. Use the UP or DOWN buttons to select
the MODE/OK button to enter the submenu.
4. Press the UP or DOWN buttons to select your desired selection, press the
MODE/OK button for your selected setting (Cancel, OK).
NOTE: This will delete all of your media and cannot be undone.
5. You can also press the MENU button to exit the submenu without making
a selection.
3.4.9 Default Settings
Factory default settings can be restored in this menu. This function will
not delete the media stored on the memory card, and will only restore all
1. In Video or Photo Mode press the MENU button to enter the settings mode.
2. Then press the MENU button again to enter the Setup mode.
3. Use the UP or DOWN buttons to select Default Settings and press the
MODE/OK button to enter the Default Settings submenu.
4. Press the UP or DOWN buttons to select your desired option, then press
the MODE/OK button to confirm your selection (Cancel, OK).
5. Press the MENU button to exit the submenu without making a selection.
3.4.10 Version
The firmware version of the camcorder can be viewed here.
1. In Video or Photo Mode press the MENU button to enter the settings
mode.
2. Then press the MENU button again to enter the Setup mode.
3. Use the UP or DOWN buttons to select Version .
4. The firmware version will be shown on the screen.
Memory Card and press
30