Table of Contents
Advertisement
2. First Use
Inserting the Memory Card
2.2
Insert the included MicroSD memory card to record and store your videos
and photos. When the battery is low, media stored on the memory card will
not be erased. Please insert the MicroSD memory card by following the
steps below:
1. Open the battery door to access the memory card slot.
2. Insert the memory card. Ensure that the metal contacts are inserted first.
Push the memory card down until you hear an audible click.
The memory card can only be inserted in one way. Do not force the
card in if it will not go in smoothly.
3. Close and lock the battery door.
4. To remove the memory card, simply push in and the card will eject out.
NOTE:
Please format the memory card before using the camcorder
(Caution, this will erase all data on the card).
Do not remove or insert the memory card when recording. It may
damage the card or cause data loss.
Memory card rating must be Class 10 or above.
Installing the Battery
2.3
Insert the lithium-ion battery into the battery compartment with the metal
contacts facing the inside of the camcorder. Push the battery in until it
locks into place. The battery can only be inserted one way, if it does not
lock into place then the battery has been inserted in the wrong orientation.
17
Advertisement
Table of Contents
