Matrox Meteor-II /1394 Installation And Hardware Reference page 15

3. If present, remove the blank metal plate located at the back
of the selected slot. Keep the removed screw; you will need
it to fasten the Matrox Meteor-II /1394 board.
4. Carefully position Matrox Meteor-II /1394 in the selected
PCI slot as illustrated below. If you are using a tower
computer, orient the board to suit the board slots in your
computer.
SCREW
M A T R O X M
METAL
PLATE
32-BIT PCI BOARD SLOT
5. Once perfectly aligned with an empty slot, press the board
firmly but carefully into the connector.
6. Anchor the board by replacing the screw that you removed.
7. Replace the cover of your computer.
8. Connect your video sources. For details, see the Connecting
external devices section.
9. Turn on your computer.
In some cases, when you boot your computer, Windows'
Plug-and-Play system will detect a new PCI card and you
will be asked to assign a driver to it. At this point, you
should click on Cancel because the driver will be installed
during the installation of MIL or one of its derivatives.
Installing Matrox Meteor-II /1394
E T E O R - I I
15
PCI form factor