Connecting video
sources
Connecting devices to Matrox Morphis QxT
The Matrox Morphis QxT board has two connectors on its bracket:
• A high-density DBHD-44
• A high-density DBHD-15
44-pin video input
connector
15-pin video output
connector
To connect a video source to your Matrox Morphis QxT, plug the
HD-44M-18BNC* cable into the DBHD-44 video input connector. Connect
your video sources to the BNCs at the other end of the cable.
*. Sometimes referred to as DB-44.
†. Sometimes referred to as DB-15, but more accurately known as DE-15.
Connecting devices to Matrox Morphis QxT
*
female connector for video input.
†
female connector for video output.
23